Department Of Mechanical Engineering
Research
| Sr.No. | Name of the candidate | Name of the Supervisor(s)/ Co-Supervisor(s) | Title | Year |
|---|---|---|---|---|
| 1 | SURAJ KUMAR SINGH | PROF. SABAH KHAN |
PROCESSING AND CHARACTERIZATION OF PLANT NANO FIBERS REINFORCED POLYMER COMPOSITE
 Abstract
| 2024 |
| 2 | Navneet Kumar Suman | - |
Mechanical and Thermal Analysis of Multi -Metallic Cryogenic Vessel for Superconducting Clinical Diagnostics
Abstract
| 2023 |
| 3 | Ashwni | Dr. Ahmad Faizan Sherwani |
Analysis of Low-Grade Heat Source Driven Organic Rankine Cycle Integrated Refrigeration System
Abstract
| 2023 |
| 4 | Rehan Farooque | Dr. Mohammad Asjad / Dr. Syed Javed Ahmed Rizvi |
Performance analysis of Injection Moulded materials for automotive Segments
Abstract
| 2023 |
| 5 | Rahul Katna | Dr. Mohammad Suhaib / Dr Narayan Agrawal |
Development of non-edible oil based cutting fluid and design of delivery system for machining
Abstract
| 2023 |
| 6 | Shadab Ahmad | Dr. Tasmeem Ahmad Khan |
Study of Performance of Solar Thermal Power Plant Using Various types of Thermodynamic Cycles
Abstract
| 2023 |
| 7 | Firasat Husain | Prof. Arshad Noor Siddiquee / Prof. Z. A. Khan |
Surface Density Modification Using Hybrid FSP
Abstract
| 2023 |
| 8 | MOHAMMAD NAWAZ KHAN | Prof. Munawar Nawab Karimi |
ANALYSIS OF HEAT TRANSFER PROCESS IN MICROCHANNEL HEAT SINK
Abstract
| 2023 |
| 9 | Salma Khatoon | Prof. Munawar Nawab Karimi |
Comparison of Fourth Generation Refrigerants By Second Law Efficiency and Exergy Destruction Analysis
Abstract
| 2023 |
| 10 | MOHD SHAHID | Prof. Munawar Nawab Karimi |
OPTIMIZATION OF BUILDING ENERGY PERFORMANCE
Abstract
| 2023 |
| 11 | SAMEERA MUFAZZAL | Prof. S. M. Muzakkir / Dr. Sidra Khanam |
Some Studies on Fault Detection in Engineering System
Abstract
| 2023 |
| 12 | Md Nadeem Alam | Prof. Z. A. Khan / Prof. A. N. Siddiquee |
Investigation on Machining of Hard-to-Machine Material using EDM
Abstract
| 2023 |
| 13 | Shafi Ahmad | Prof. Zahid A. Khan / Prof. Mohammed Ali |
Modelling and Simulation of a Flexible Manufacturing System with Dynamic Scheduling of Parts
Abstract
| 2023 |
| 14 | Md. Ziyaur Rahman | Prof. Z.A. Khan/Prof. Arshad Noor Siddiquee |
Surface Hardening using Hybrid FSP
Abstract
| 2023 |
| 15 | Abdul Gani | Dr. Mohammad Asjad / Dr. Faisal Talib |
Development of a Methodology for Environmental Sustainability Assessment.
Abstract
| 2022 |
| 16 | JIYAUL MUSTAFA | Dr. ALI HASAN |
Some studies on modeling of epicyclic gear trains
Abstract
| 2022 |
| 17 | Syed Mohammad Mahmood | Prof. M. Emran Khan |
Utilization of Potential of Solar Energy in Different Thermal Systems
Abstract
| 2022 |
| 18 | Nitin Kumar Waghmare | Prof. Sabah Khan |
Fatigue and Erosive Wear Analysis of Biodegradable Nano Composite
Abstract
| 2022 |
| 19 | Pankaj Kumar Chauhan | Dr. Sabah Khan |
Analysis and Simulation of Functionally Graded Materials Based on Mechanical Behavior using FEA
Abstract
| 2022 |
| 20 | Gajender | Prof. Zulquernain Mallick / Dr. Mohd. Asjad |
Risk Assessment and Effect on Cognitive Ability due to Work related Musculoskeletal Disorder and Work Related Fatigue among the Cab drivers in Delhi and NCR Region
Abstract
| 2022 |
| 21 | Manoj Kumar Yadav | Prof. Arshad Noor Siddiquee / Prof. Z. A. Khan |
Some Studies on Surface modification using Hybrid Friction Stir Processing Approach
Abstract
| 2022 |
| 22 | Shanay Rab | Dr. Abid Haleem and Dr. Sanjay Yadav |
Design, Development and Analysis of Pressure Calibrator and Associated Components for High Pressure Metrology
Abstract
| 2022 |
| 23 | Vivek Kumar Jain | Prof. (Dr.) Arshad Noor Siddiquee / Prof. (Dr.) Zahid Akhtar Khan |
Investigations on Surface Modification Using Friction Stir Processing (FSP)
Abstract
| 2022 |
| 24 | ABDUL QADEER | PROF. MOHAMMAD EMRAN KHAN |
MODELLING OF SOLAR RADIATION AND ITS UTILIZATION IN SPACE CONDITIONING
Abstract
| 2022 |
| 25 | Sazaad Hasan | Prof. Mohammad Emran Khan |
Prediction of Energy Saving In Solar Thermal Hybrid Vrf System in DSelhi
Abstract
| 2022 |
| 26 | Mohd Shoeb | Dr. Lokesh Kumar / Professor Abid Haleem |
A FEASIBILITY STUDY ON DEVELOPMENT AND CHARACTERISATION OF 3D PRINTED COTTON POLY LACTIC ACID BIOCOMPOSITE
Abstract
| 2022 |
| 27 | ASHUTOSH SINGH | Dr. Mohammad Asjad |
Some Studies on Reconfigurability Issues for Manufacturing Systems
Abstract
| 2021 |
| 28 | Mohd Javaid | Prof. Abid Haleem |
Role of Projet 3D Printing and 3D Scanner in Product Design and Development
Abstract
| 2021 |
| 29 | Mohd Muqeem | Dr. Ahmad Faizan Sherwani / Prof. Mukhtar Ahmad |
Improving Diesel Engine Performance and Exhaust Emission by Optimizing Various Parameters of Air Supplied from Turbocharger
Abstract
| 2021 |
| 30 | Sonal Khurana | Prof. Abid Haleem |
A Study of Practices for Integration of Sustainability with Innovation for Micro, Small and Medium Scale Enterprises: An Indian Manufacturing Perspective
Abstract
| 2021 |
| 31 | Naseem Ahamad | Prof. Aas Mohammad / Dr. Pallav Gupta |
Structural and Mechanical behavior of Aluminum 6351- Al2O3/C/SiC/TiO2 Hybrid metal matrix composite
Abstract
| 2021 |
| 32 | Md Rashid Akhtar | Prof. Aas Mohammad |
Analysis and optimization of composite leaf spring using intelligent techniques
Abstract
| 2021 |
| 33 | Salem Alabd Mohamed Abdasslam | Prof. M. N. Karimi |
Analysis of Vapor Absorption Refrigeration System
Abstract
| 2021 |
| 34 | Vardan Parashar | Prof. Abid Haleem / Prof. J.A. Usmani |
Performance Evaluation of Fruit Supply Cold Chain – A case Study
Abstract
| 2021 |
| 35 | MD ZAKIR HUSSAIN |
EVALUATION OF MECHANICAL AND TRIBOLOGICAL PROPERTIES OF MnO2/CNT POLYMER NANOCOMPOSITES
Abstract
| 2021 | |
| 36 | Mohd. Zaheen Khan |
Computational Modelling for Performance analysis of solar stills
Abstract
| 2021 | |
| 37 | Abdul Qaiyum | Prof. Aas Mohammad |
Dimensional Synthesis and Optimization of 1-F Six Bar Planar Linkages
Abstract
| 2021 |
| 38 | Ahmad Kamal Hassan | Dr. Mohd. Muzaffarul Hasan and Dr. Mohammad Emran Khan |
Thermal Performance Investigation of Dimple Roughened Multiple Arc Pattern Solar Air Heater
Abstract
| 2021 |
| 39 | Shailendra Kumar | Prof. Mohd. Suhaib / Dr Mohammad Asjad |
Implementation Issues and Framework Development for Industry 4.0
Abstract
| 2021 |
| 40 | Vipin Kaushik | Prof. (Dr.) Aas Mohammad |
A Computational Approach for the Modeling of Planar Multiple Jointed Kinematic chain and Mechanisms
Abstract
| 2021 |
| 41 | Mohd. Furqan | Prof. Mohd. Suhaib |
Analysis of Parallel Manipulators using Flexible Joints
Abstract
| 2019 |
| 42 | Vineet Kumar | Professor Abid Haleem |
“Computational and Experimental Analysis of Parts in three Dimensional Printing
Abstract
| 2018 |
| 43 | Mohd. Atif Wahid | Prof Zahid Akhtar Khan / Prof Arshad Noor Siddiquee |
Some studies on Under Water Friction Stir Welding
Abstract
| 2018 |
| 44 | Hasan Zakir Jafri | Prof. Aas Mohammad |
Experimental Modal Analysis of Mechanical System
Abstract
| 2018 |
| 45 | Nidhi Sharma | Prof. Zahid A. Khan |
Some Studies on Friction Stir Welding (FSW) of Non Ferrous Dissimilar Materials
Abstract
| 2018 |
| 46 | Deepak Tiwari | Dr Ahmad Faizan Sherwani / Dr. Akhilesh Arora |
Thermodynamic Analysis of Solar Driven Organic Rankine Cycle
Abstract
| 2018 |
| 47 | Lalit Kumar | Prof. Abid Haleem |
Product Development/Design Using Rapid Prototype Technique
Abstract
| 2018 |
| 48 | Mohammad Mohsin | Prof. Aas Mohd. / Dr. M. Arif Siddiqui, Prof. Mohd. Suhaib |
Effect of Compaction Pressure on Green and Sintered Properties of Synthesised Aluminium Powder Composites
Abstract
| 2018 |
| 49 | Bisma Mannan | Prof. Abid Haleem |
A Study on Innovation Management practices in Indian SMEs
Abstract
| 2018 |
| 50 | Devendra Singh | Dr. Mohd. Suhaib |
IMPROVED DESIGN OF THE GEAR DRIVES
Abstract
| 2017 |
| 51 | Khalid H. Maulod Almadhoni | Dr. Sabah Khan |
Fabrication and Characterisation of Manganese Oxide Aluminium Alloy Composite used for an Optimization of the Solar Latent Heat Storage Unit
Abstract
| 2017 |
| 52 | Syed Shane Haider Rizvi | Dr.Ali Hasan / Prof. R.A.Khan |
TO DEVELOP NEW METHODS TO DETECT ISOMORPHISM AND DISTINCT MECHANISMS IN KINEMATIC CHAIN
Abstract
| 2017 |
| 53 | SUNEEL KUMAR KALLA | Prof. (Dr) J.A.Usmani / Dr. B.B. Arora (DTU) |
Thermoeconomic Analysis of Refrigeration System
Abstract
| 2017 |
| 54 | Khalid Nafees | Prof. (Dr.) Aas Mohammad |
Some Studies on Dimensional Synthesis of Planar Kinematic Linkages
Abstract
| 2017 |
| 55 | Subhash Mishra | Prof. (Dr.) J.A. Usmani |
Energy Conservation Through Upgraded Thermal Insulation System
Abstract
| 2017 |
| 56 | Ashok Kumar Yadav | Prof. (Dr.) M. Emran Khan / Dr. Amit Pal (DTU, Delhi) |
Production of Bio-Diesel from non-edible oils and its performance and emission analysis on CI Engine
Abstract
| 2017 |
| 57 | NAZMA EHTESHAM | Prof. Mohd. Suhaib / Prof. Sudipto Mukherjee |
SOME STUDIES IN MULTIFINGER ROBOTIC GRASPING
Abstract
| 2017 |
| 58 | Noor Zaman Khan | Prof. Zahid A. Khan / Prof. Arshad Noor Siddiquee |
An Investigation on the Friction Stir Welding of Dissimilar Aluminium Alloys
Abstract
| 2017 |
| 59 | Dharmendra Singh | Dr. Aas Mohammad / Prof. R. A. Khan | Identification and Synthesis of Kinematic Chains and their Derived Mechanisms | 2016 |
| 60 | Javed Khan | Professor Abid Haleem |
Role of Technology Management in Green Practices: An Indian Perspective
Abstract
| 2016 |
| 61 | Suha Karim Shihab | Dr. Aas Mohammad / Prof. Zahid A. Khan |
Experimental Studies On Turning High Hardness Aaloy Steel With High Performance Tools
Abstract
| 2015 |
| 62 | Mohammad Kamal Asif Khan | Prof. Abid Haleem / Prof. Mohammed Arif |
Greening The Supply Chain: A Comparative Study
Abstract
| 2015 |
| 63 | Ramesh S P | Prof. M Emran Khan |
Energy Conservation and Efficiency Improvement by Automation in Intelligent/Green Buildings from Concept to Commissioning
Abstract
| 2015 |
| 64 | Badshah Alam | Prof. M. Emran Khan / Prof. G.N. Tiwari |
Yearly Performance of Active and Passive Solar Distillation System for Different Climate Condition in India
Abstract
| 2015 |
| 65 | Sandeep Kumar Kamboj | Prof. M.N.Karimi |
Exergy Analysis of Internal Combustion Engine based Combined Power and Cooling Cycles
Abstract
| 2015 |
| 66 | Brijpal Singh | Prof. Zahid A . Khan |
Some studies on submerged arc welding of steel
Abstract
| 2015 |
| 67 | Mohsin Talib Mohammed | Prof. Zahid A. Khan |
Influence of Thermomechanical Processing on Mechanical and Corrosion Properties of Titanium Alloys.
Abstract
| 2015 |
| 68 | Umesh Kumar | Prof.(Dr.) M.N. Karimi |
Study of the Scope for the Recovery of Waste Heat from Different Industries and iIt’s Optimized Utilization towards Improving Energy Efficiency
Abstract
| 2015 |
| 69 | Arvind Kumar Tiwari | Prof.M. M. Hasan / Prof. Mohd. Islam |
Effect Of Operating Variables On The Performance Of Combined Cycle Power Plant
Abstract
| 2015 |
| 70 | Manoj Kumar Lohumi | Dr. Aas Mohammad / Prof. I. A. Khan |
Characterization of planar kinematic chains and their derived mechanisms
Abstract
| 2014 |
| 71 | Saeib A. Alhadi Faroun | Dr. Mohammad Islam / Aas Mohammad |
STUDY OF FLUID AND PHYSIO-MECHANICAL PROPERTIES OF FLY ASH BASED HIGH STRENGTH POLYMERIC MATERIALS
Abstract
| 2014 |
| 72 | Shyam Lal | Dr. Zahid A Khan / Dr Sudhir Kumar |
Fabrication and machining of metal matrix composite
Abstract
| 2014 |
| 73 | Farheen Bano | Dr. Zulquernian Mallick / Dr Abid Ali Khan |
The prevalence of upper limb work related musculo-skeletal disorders (WMSDs) related to occupational tasks involving torque and power grip
Abstract
| 2014 |
| 74 | Pawan Kumar Arora | Prof . Abid Haleem / Prof. M.K.Singh |
OPTIMAL DESIGN OF A PRODUCTION SYSTEM
Abstract
| 2014 |
| 75 | VINOD KUMAR SAINI | Prof. (Dr.) ZAHID A. KHAN |
SOME STUDIES ON MACHINING OF METAL MATRIX COMPOSITE USING WIRE ELECTRIC DISCHARGE MACHINING
Abstract
| 2014 |
| 76 | BASANT KUMAR AGRAWAL | PROF.M. N. KARIMI |
THERMODYNAMIC PERFORMANCE ASSESSMENT FOR A NOVEL COMBINED POWER & EJECTOR-ABSORPTION REFRIGERATION CYCLE
Abstract
| 2014 |
| 77 | Mohit Singh | Dr. I.A. Khan / Dr. Sandeep Grover |
Deployment and Effectiveness of System Techniques in Measuring and Comparing Quality of Manufacturing Organizations
Abstract
| 2013 |
| 78 | Ahmad Faizan Sherwani | Prof J A Usmani |
Life Cycle Assessment of Photovoltaic Electricity Generation System
Abstract
| 2013 |
| 79 | Shailesh Kumar Trivedi | Prof. Abid Haleem |
Exergy Analysis and Utilization of Wet Ethanol in HCCI Engines for Cogeneration and Trigeneration Applications
Abstract
| 2013 |
| 80 | Ravindra Kumar | Prof. Abid Haleem / Prof. S.K. Garg, Dr. R.K. Singh |
Analysis and Modeling of Flexible Manufacturing Systems
Abstract
| 2013 |
| 81 | Shailendra Kumar | Prof. I. A. Khan / Prof. O. P. Gandhi |
Some Studies in Design for Maintainability of Mechanical Systems: Psychological Factors Perspectives
Abstract
| 2013 |
| 82 | Faisal Zia Siddiqui | Prof. M. E. Khan |
Evaluation of Energy Potential from Unsecured Landfill Site in India
Abstract
| 2013 |
| 83 | Ashok Kumar Dargar | Prof. R. A. Khan / Dr. Ali Hasan |
Some Studies on Isomorphism and Inversions of Compound Kinematic Chains
Abstract
| 2013 |
| 84 | Ashish Karnwal | Dr. Mohd. Muzaffarual Hasan / Dr. Naveen Kumar |
EXPERIMENTAL STUDIES ON THE POTENTIAL UTILIZATION OF BIODIESEL IN A VARIABLE COMPRESSION RATIO DIESEL ENGINE
Abstract
| 2012 |
| 85 | MOHD NADEEM KHAN | Prof. (Dr.) MOHD ISLAM / Prof. (Dr.) M.M.HASAN |
ANALYTICAL AND EXPERIMENTAL STUDIES OF FLUID FLOW AND HEAT TRANSFER IN MICROCHANNELS
Abstract
| 2012 |
| 86 | LAKHWINDER SINGH | PROF. (DR.) R.A. KHAN / PROF. (DR.) M.L. AGGARWAL |
“EFFECT OF SHOT PEENING ON THE MECHANICAL PROPERTIES OF AUSTENITIC STAINLESS STEEL”
Abstract
| 2012 |
| 87 | Mohd. Asim Qadri | Prof. Abid Haleem / Dr. Mohammed Arif |
Green Supply Chain Practices in India
Abstract
| 2012 |
| 88 | ALI KAMIL JEBUR | PROF. I. A. KHAN / PROF. Y. NATH |
SOME STUDES ON THE STABILITY AND NON-LINEAR DYNAMIC CONTACT BETWEEN ROTATING SPUR GEARS
Abstract
| 2012 |
| 89 | DEVENDRA VASHIST | PROF. MUKHTAR AHMAD |
STUDY OF PRODUCTION, ANALYSIS AND PERFORMANCE OF BIO-DIESEL
Abstract
| 2012 |
| 90 | ABDUL JABBAR MUTTAIR AHMED | PROF. MUKHTAR AHMAD / DR. ABDUR RAHIM |
THREE DIMENSIONAL FLOW OF RECIRCULATING AIR WITHIN A ROOM WITH INTERNAL OBSTRUCTION
Abstract
| 2012 |
| 91 | KARIM H. ALI ABOOD | PROF. RASHEED AHMED KHAN |
DYNAMIC RESPONSE OF RAILWAY CARRIAGE
Abstract
| 2012 |
| 92 | Ahmed Hameed Kaleel | Prof. Z. Mallick |
Some Studies on Noise and its Effects on Industrial/ Cognitive Task Performance and Modeling
Abstract
| 2012 |
| 93 | Mohd. Arif | Prof. M. Emran Khan / Prof. Avinash Chandra |
Total Life Cycle Analysis of Renewable Energy System: Energy and Environmental Aspects
Abstract
| 2011 |
| 94 | Rohit Verma | Dr. Abdul Khaliq |
Thermodynamic Analysis and optimization of Finite Time Thermal Power Cycles
Abstract
| 2010 |
| 95 | Dhirgham A.H. Al-Khafagiy | Dr. Abdur Rahim / Dr. Prabal Talukdar |
An Aerodynamic Study of Diffuser-Combustor Flow Interaction
Abstract
| 2010 |
| 96 | Keshavendra Choudhary | Dr. Abdul Khaliq |
Some Aspects of Exergy Application to the Analysis and Optimization of Thermal Power Systems
Abstract
| 2009 |
| 97 | Tilak Raj | Dr. Mohd. Suhaib / Prof. R.A. Khan /Dr. Ravi Shankar[ Deptt.of Management Studies IIT# Delhi] |
STUDY OF BARRIERS AND ENABLERS IN IMPLEMENTATION OF FLEXIBLE MANUFACTURING SYSTEM
Abstract
| 2009 |
| 98 | Mudar Dayoub | Prof. R. A .Khan/ Dr. M, Sharif[ Department of Civil Engg ] /Dr. M. Suhaib [Department of Mech. Engg, JMI] |
Some studies on the Principles and Mechanisms for Loading and Unloading.
Abstract
| 2009 |
| 99 | Sanjay Kumar | Professor Abid Haleem |
SCM Issues Under Uncertainty
Abstract
| 2009 |
| 100 | Rajesh Kumar | Dr. Abdul Khaliq |
Thermodynamic Optimization of Refrigeration System using an Entropy Generation Minimization Method.
Abstract
| 2008 |
| 101 | VAKKAR ALI | Dr. M. Islam/ Dr. Abdur Rahim / Dr. Naseem Ahmad -Department of Mathematics] |
A COMPARATIVE STUDY OF FACTORS INFLUENCING AERODYNAMIC DRAG RESULTING FUEL CONSUMPTION IN DIFFERENT MODEL OF AERODYNAMIC VEHICLE
Abstract
| 2008 |
| 102 | Kali Charan Yadav | Prof. Abid Haleem |
Management of Thermal Power Plant Performance Parameters.
Abstract
| 2008 |
| 103 | Sabah Khan | Prof. R. A .Khan | Investigation of Tribological and Mechanical Behaviour of Natural Mineral Reinforced Aluminium Alloy and Plastics. | 2008 |
| 104 | Dr. Tasmeem Ahmad Khan |
INVESTIGATION ON IRREVERSIBILITIES DUE TO HEAT TRANSFER AND FLUID FLOW IN THERMAL POWER CYCLES
Abstract
| 2007 | |
| 105 | Mr. Mohd. Nadeem |
Energy Conservation in Air-Conditioning using Variable Volume Chilled Water Pumping, Variable Air Volume (VAV) Boxes and Variable Fresh Air Arrangement for Indian Climatic Conditions
Abstract
| 2007 | |
| 106 | Mr. Asif Khan |
Assessment and Evaluation of Air to Air Heat Recovery Devices in Air-Conditioning Application for Indian Conditions
Abstract
| 2007 | |
| 107 | Mohan Lal | Dr R. A. Khan /Dr V.P. Agrawal |
Effect of Shot Peening Parameters on Fatigue Design
Abstract
| 2007 |
| 108 | Dr. Aas Mohammad | Prof. R. A. Khan, Ph. D/ Prof. V. P. Agrawal, Ph. D |
STRUCTURAL SYNTHESIS AND MODELING OF KINEMATIC CHAINS AND MECHANISMS
Abstract
| 2007 |
| 109 | Sandeep Grower | Dr. I. A. Khan/Dr. V. P. Agarwal |
Some Studies on TQM Environment in Industry for Global Competitiveness
Abstract
| 2005 |
| 110 | Mohd. Suhaib | Dr. R. A Khan |
Studies in Robotics Grasping
Abstract
| 2004 |
| 111 | Vijay Kumar Agrawal | Dr. Abid Haleem |
Role of Information Technology in Business Transformation.
Abstract
| 2002 |